- The BMS24 uses advanced ADC measurement technology, high accuracy, high voltage and high current detection
circuit. The maximum voltage measurements tolerance is within 5mV at up to 24S LiPo battery (102V)
- Support regenerative braking, during braking operation can charge the batter pack and the discharge power (Wh) will
decrease to response to the braking power.
- Charge/discharge current up to 600A. Bigger current can be customized.
- 1.2A per cell balance current is very useful for large capacity battery pack, the feature can resume all cell voltage
balance status at the shortest time. Over temperature protection make sure the system safety during balance.
- BMS24 calculate and display the charge and discharge power (Wh), generally the battery rated power is rated voltage
multiply rated battery capacity.
- TFT LCD screen provides rich information including current, voltage, power, capacity, battery status, SOC and
temperature and so on.
- BMS24 features a maximal safety protection, within the range parameters can be setup, BMS24 will alarm and cutoff
charge or discharge according to users’ setup, out of range of parameters, and trigged absolute LiPo & LiFe Battery Management System BMS24 V1.05
maximum ratings BMS24 will force to cutoff charge or discharge to prevent the battery from fire.
- Minimize the power consumption by draw current from all cells or external power supply.
- Dual power design, the unit can be powered by all cells or external power supply.
- Detect cell count at any time, and compare with the count detected when switch on first time. If it is not uniformity, the
device will alarm and cutoff charge or discharge according to users’ setup, the feature can prevent any cell connection
- Sound alarm and LED alarm will be triggered when any warning events happened, and then wait several seconds cut off
or Don’t cut off charge or discharge. The delay time can be programmed.
- Charge relay and discharge relay are controlled independently.
- Two temperature sensors monitor battery temperature on different position.
- Supports upgrading the firmware program by USB port.
- BMS24 provide users the maximal flexibility, key parameters can be programmed.
- BMS24 display battery SOC or called battery gauge similar with car dashboard. Cell count, battery pack voltage and
battery gauge (%) is displayed simultaneously.
- In case that the battery pack need not be charged and discharged, Press STOP button enter into sleep mode to save
energy consumption, at this mode, Charge and Discharge is forbidden, and LCD back light is off. Press any key to
resume normal work mode.
- LCD back light ON time can be programmed to save energy, when it is OFF, press any key to resume “ON”.